2010 - Current Toyota FJ Cruiser Suspension System - Stage 7

 

 

Overview:

The Stage 7 suspension system for the 2010 +  FJ Cruiser is the best over all handling bolt on suspension system you can install, and incorporates all of the top level components along with adding the CDCV adjustable shocks. This system can handlle any terrain you throw at it and gives you unsurpassed ride quality on the street with incredible offroad performance. Rear ICON Billet Upper Links and Adjustable Pan Rod Bar were added to make the Stage 6 system, which add strength and allow you to fine tune rear end positioning. The Remote Reservoir 2.5" coil over shocks and Billet Upper Control Arms give the FJ's front suspension longevity and great heat dissipation, our rear springs in this system give the FJ Cruiser 2" of lift, and the rear billet lower links help manage the rear axle to cycle smoothly with out bind. ICON's V.S. Series 2.5" Diameter Rear Resevoir Shocks are critical component for people that use their vehicles in various on and offroad situations. These shocks are tuned specifically to give your FJ a balanced and smooth ride quality, along with extended length shock cooling from the increased oil volume and piggyback reservoir. 57810 FJ 2.5" rear shocks have a built in bump zone to increase your compression valving in the final two inches of compression travel, which prevents the harsh bottom out sensation, and gives the vehicle a much more controlled ride quality. ICON's CDC Valve upgrade is included in this stage front to back for those desiring an easy way to tune the ride externally with 10 settings from soft to hard.

 

Tech Info:

• We recommend the use of our #56100 shock shin guards or a protective boot to reduce the chance of shock shaft damage. These shocks are located in a vulnerable position that allows debris to easily come in direct contact with the shock shaft.

Wheel & Tire Fitment Info:

OEM Wheels & Tires:    Yes

Aftermarket Wheels:    16" - 18" w/ up to 5" Backspace

                                 20" + w/ up to 5.250 Backspace (pending wheel make)

Aftermarket Tires:       33" Tall Tires

                                 Larger Tires May Fit but Fender Trimming and Modifications will be required

System Components:

58747C  (QTY - 1)  - Extended Travel Remote Reservoir Adjustable Coil-over Shock Kit w/ CDCV

58551    (QTY - 1)  - Billet Uniball Upper Control Arm Kit

52700    (QTY - 1)  - 2" Lift Rear Coil-spring Kit

57810C  (QTY - 2)  - ICON V.S. 2.5 Series Remote Reservoir Rear Shocks w/ CDCV

54000    (QTY - 1)  - Billet Aluminum Lower Rear Trailing Arm Kit

54100    (QTY - 1)  - Billet Aluminum Upper Rear Trailing Arm Kit

54200    (QTY - 1)  - Rear Adjustable Pan-Rod Bar Kit

Options:

56100   (QTY - 1)  - ICON Rear shock shin guards

52800    (QTY - 1)  - ICON Overland Series dual rate 3" lift rear coil springs

56104    (QTY - 1)  - Rear hydraulic bumpstop kit

198000  (QTY - 1)  - ICON 2 pin spanner wrench

 

1991-97 Toyota Land Cruiser 80 Series 3" Suspension System - Stage 3

 

 

OVERVIEW:

After an in-depth R&D process, ICON engineers have developed a 3” suspension system for the 80 Series that is aimed to improve on-road handling characteristics while also maximizing the Land Cruiser’s off-road potential. This Stage 3 system includes ICON-designed dual rate coil springs, caster correction bushings, sway bar relocation components, all bracketry and hardware required for install, and ICON Vehicle Dynamics 2.5 Series remote reservoir shocks that feature a vehicle specific valving for optimized ride quality and balanced damping front to rear. The 2.5" remote reservoir shocks front and rear ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during extended offroad use. The Stage 3 system outfits the 80 Series Land Cruiser with ICON 2.5 Series shocks that feature CDCV, or Compression Damping Control Valve. This technology allows end-users to quickly adjust the ride quality of their shocks with the simple turn of a knob – no tools required! With ten high-resolution settings to choose from, the ICON CDC Valve will allow for the perfect ride quality across any terrain. This ICON Stage 3 System is the perfect suspension system for drivers seeking a quality on-road ride with outstanding off-road performance under extreme use, and the ability to fine tune the vehicle's performance for any conditions encountered.

KEY FEATURES:

  • 3” lift height with level stance from front to rear
  • Approximately 40% increased front wheel travel over stock
  • Approximately 35% increased rear wheel travel over stock
  • ICON-engineered dual rate coil springs provide exceptional on-road ride quality and outstanding off-road performance
  • Vehicle specific tuned 2.5 Series front and rear shocks offer superior shock damping and control
  • 2.5 body remote reservoir shocks with 7/8" shaft
  • Corrosion resistant CAD plated shock body
  • 6061 aircraft grade aluminum CNC machined components
  • ICON CDC Valve allows quick and easy end-user compression adjustability
  • 100% bolt-on design means no drilling, cutting or welding necessary for install
  • Made in the USA

WHEEL & TIRE FITMENT INFO:

OEM Wheels & Tires: Yes

Aftermarket Wheels: 8-8.5" Wide, 4.625" Backspace

Aftermarket Tires: 33 x 11.50

(Larger Tires May Fit but Fender Trimming and Modifications will be Required)

SYSTEM COMPONENTS:

3" FRONT DUAL RATE SPRING KIT
3" REAR DUAL RATE SPRING KIT
SWAY BAR RELOCATION KIT

CASTER CORRECTION KIT
0-3" FRONT 2.5 VS RR CDCV PAIR
0-3" REAR 2.5 VS RR CDCV PAIR

OPTIONS:

BRAKE LINE KIT

1991-97 Toyota LC 80 Series V.S. 2.5 Series RR Front Shocks w/CDCV (0-3" Lift)

OVERVIEW:

ICON Vehicle Specific (V.S.) 2.5 Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications; ICON’s unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.

KEY FEATURES:

  • ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
  • ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
  • Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
  • Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
  • One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road 
  • 7/8” diameter induction hardened, chrome plated shock shaft
  • Polyurethane bushings and forged steel mounting stems for OE factory type fitment
  • PTFE lined spherical bearings and application specific mounting hardware
  • 6061 aircraft grade aluminum CNC machined components
  • CAD plated, precision machined 1026 DOM steel shock body for maximum durability and corrosion resistance
  • 100% Rebuildable
  • 100% Revalveable
  • Made in the U.S.A.

NOTES:

  • ICON V.S. 2.5 Series shocks are sold in pairs
  • Price listed is for two (2) shock absorbers

1991-2007 Toyota LC 80/100 Series V.S. 2.5 Series RR Rear Shocks w/CDCV (0-3" Lift)

                

OVERVIEW:

ICON Vehicle Specific (V.S.) 2.5 Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications; ICON’s unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.

KEY FEATURES:

  • ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
  • ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
  • Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
  • Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
  • One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road 
  • 7/8” diameter induction hardened, chrome plated shock shaft
  • Polyurethane bushings and forged steel mounting stems for OE factory type fitment
  • PTFE lined spherical bearings and application specific mounting hardware
  • 6061 aircraft grade aluminum CNC machined components
  • CAD plated, precision machined 1026 DOM steel shock body for maximum durability and corrosion resistance
  • 100% Rebuildable
  • 100% Revalveable
  • Made in the U.S.A.

 NOTES:

  • ICON V.S. 2.5 Series shocks are sold in pairs
  • Price listed is for two (2) shock absorbers