Description
Two tasks, one tool. A integrated, powerful way to bring both an air compressor and a 9,500 lb. Winch wherever you need. Great for brush trucks or Jeeps.
- A vehicle-mounted multitool combining a winch and a premium air compressor
- 9,500 lb. (4,310 kg) pulling capacity with fast linespeed
- Air compressor with flow ratings of 90 CFM @ 0 PSI; 5 CFM @ 90 PSI. 100 PSI max. (340 l/min. @ 0 kPA; 142 l/min. @ 620 kPA. 690 kPA max.)
- 1/2 gallon (1.9 l) on-board air tank/intercooler
- Extended-duty contactor control pack
- Thermometric switch protects against overheating
- 125′ of 5/16″ (38 m of 8 mm) wire rope and roller fairlead
- Available in 12V only
Features
POWERPLANT HP SPECS/PART NUMBER
Rated Line Pull: 9,500 lbs. (4310 kgs) single-line
Motor: Gen ll Series Wound 4.6 hp 12V, with Thermal Protection Shutoff Switch
Electrical controls: Contactor
Remote Control: Remote switch with Thermometric
Geartrain: 3-stage planetary
Gear ratio: 156:1
Clutch (freespooling): Sliding ring gear
Brake: Integrated direct-drive cone brake
Wire rope: 125 ft of 5/16 in (38m of 8mm diam.)
Fairlead: Roller
Recommended battery: 650 CCA minimum
Battery leads: 2 gauge, 72 in (1.83m)
Finish: High-gloss black powdercoat
Drum diameter/Length: 2.5 in/9 in (6.4cm/23cm)
Weight: 100 lbs (45 kgs)
Air Reservoir: 1/2 gallon tank with
High Air Flow Rating: 12 CFM @ 0 psi, 5 CFM @ 90 psi
Max Air Pressure: 100 psi
Air Pressure Switch: Yes
Air Hose: 12 in nylon, with quick-disconnect. Brass air fittings and couplings